Our service has a particular algorithm for creating notifications and event clips:
1. An event gets stored and a notification is sent when detector is triggered for the first time.
2. Then if there is no triggers for at least 5 minutes, and it occurs again after that - it is considered as a new event and a new notification is sent. If the detector keeps being triggered - the new event won`t be created.
For example (the detection triggers are marked by asterisks)
 | Both triggers (12:00 and 12:16) will create a new event and send a notification (as the 5-minute algorithm is followed). |
 | An event will be created at 12:00 (detector is triggered for the first time) and at 12:16. There will be no event at 12:02 since 5 minutes have not passed between the triggers, hence a notification will not be sent either. |
If 5 minutes have passed since the most recent motion detection and there is motion happening in front of the camera, but a new event is not created, check the detectors settings: sensitivity and detection area.