Resetting NBLC-4225Z-SD

Last update: 24.03.2023

1. Turn the camera’s power off;

2. Unscrew four Philips head screws and take the defense plate on the back side of the camera off:

a0de2f0c1f05522157a3135091a638cf.png

3. Take out the SD card from the SD card slot of the camera (if used). In case you perform a reset with a card inserted in the camera, it will be formatted;

4. Plug the camera back into the power supply and wait for the camera’s system to boot (approx. 30 seconds);

5. Press down the Reset button (location shown in photo) and hold it for around 15 seconds:

60ded7a586641f861f5c0678b98d74b2.jpg

6. Release the Reset button and wait for the camera to reboot (approx. 30 seconds);

7. Unplug the camera from power, install the SD card back into the camera (if used) and plug the camera back into power.


Was this article helpful?