Resetting camera to factory default settings

Last update: 13.01.2024

Open the web interface of the camera and navigate to Setup → System → Default. Click the Default button and then OK to confirm the reset:

0j8ZS5FB9cXEmlbTZMIrWPCxjoZsnCsd4y6cAyHL
BMTO9aFw3UDSAcc17jMMtr7OD3hMZn9WLioOWepp

After this, the camera will reset, reboot, and, after around a minute or so, should again become available in your local network.

Was this article helpful?